Ancon Medical acts as an exclusive distributor for Ancon Technologies product below for the USA.
CONTROLLED POWDER PARTICLE DISPERSAL
Control of particle size and uniformity has been a major area of interest especially for particles in the micron size range. Ancon’s Aerosolizer is an excellent general purpose laboratory tool that provides a turnkey solution for experimental setups that require a controlled and stable particle source in wider size ranges from 5nm to 2μm.
The Aerosolizer generates aerosol from powder by concentrating high velocity vibrating jets of clean air at the powder surface, disturbing and separating particles. Vortices are formed by the opposing air flows inside the aerosolisation chamber which act to further separate the aerosol particles. The aerosol is then passed through a gravitational separator where larger particles are removed based on gravitational settling. The gravitational separator also serves to help stabilize the aerosol concentration which can be controlled by adjusting the pressure supplied to the chamber, the flow meter settings and the position of the jet nozzle in relation to the surface of the aerosolizing powder.
An on-board pressure gauge and flow meter are included to adjust the output particle concentration and operating flow rate. Long term stability is achieved by automatically descending the nozzle to maintain a constant height to the powder surface, the speed of which is user selectable to achieve optimal operating conditions. A mechanical agitation system sited at the base of the aerosolization chamber disturbs the bulk powder and assists the air jets in the generation of aerosol.
Ancon has used the Aerosolizer to generate aerosols from a range of different “nanopowders” including: TiO₂, ZnO, nano-diamond, functionalized TiO₂ and ZnO, carbon nanotubes, polystyrene latex spheres and more. The technology has been designed to meet a number of specific customer and market needs including:
- General aerosol research
- Metrology and instrument calibration
- Inhalation and toxicology research
- Nano materials manufacturing.
- User adjustable ultrafine and primary particle concentrations (1nm to 10μm particle size range)
- Low sample consumption (operates with as little as 0.5 mg of material)
- Focused, high energy input to release particles present in powder sample
- Stable aerosol output with generation of high concentrations of aerosol particles in the respirable fraction
- Ability to release particles in the nano-range <50nm, including primary nanoparticles
- Generation of stable concentrations of aerosol over several hours
- Ease of use; including set up, untended operation and cleaning.